Operation manual – Pro Salon
04/30/10
5
Section 2 - Continued
OPERATING YOUR TABLE
Pro Salon Electric Hydraulic Lift
OPTION: Flex Armrest.
Applies only to tables purchased with this option.
The optional flexible armrest on your Living Earth Crafts table features a positive
lock design. A locking mechanism ensures that the armrests do not unexpectedly
pull out during use. At first the armrests will be a bit tight to remove. This is
normal. Allow time to let the components “fit in”, and they will loosen over time.
1.
Install the Flex Armrests
. Installing the armrests can be done with the
table in any position, however, it may be easiest when the table top is in the
flat position. Line up the entry posts with the side grommet holes. Push the
tips into the holes until a click can be heard. If the armrest is pushed in too
far, pull it back slightly and the lock will engage. Test the locked position by
giving it a light pull. It should give resistance.
2.
Remove the Flex Armrests
. Removing the armrests can be done with the
table in any position, however, it may be easiest when the table top is in the
flat position. Grasp the armrest near the entry posts and remove one end at
a time with a sharp pull. This operation takes some effort, however this
ensures that the rest will not release during use.
Servicing of Double Insulated Products
- This is a double-insulated product, with
two systems of insulation instead of grounding. No grounding means is provided on a
double-insulated product, nor is a means for grounding to be added to the product.
Servicing a double-insulated product requires extreme care and knowledge of the
system, and is to be done only by qualified service personnel. Replacement parts for
a double-insulated product must be identical to the parts they replace.
Product Code: LE04X
www.spaequip.com
P: 707-737-1100 F: 707-737-1150
Page 7 of 15
