Operation manual – Pro Salon
04/30/10
3
Section 1, Continued
IMPORTANT SAFETY INSTRUCTIONS
Pro Salon Electric Hydraulic Lift
CAUTION!
When lowering any section of the table, make sure that no supplies or any part of
yours or your client’s body is between the top of your table and its base. This could
result in injury, or could damage your table as well as the item. It is recommended
that you always return your table top to the lowest flat position to avoid leaving the
base exposed. By doing so, you will minimize the possibility of damage to your table
by unequal weight distribution such as sitting on the leg section while raised.
When lowering the table height, be sure there are no foreign obstacles are
underneath your table that could obstruct it from lowering completely. This could
damage your table.
1. Maximum weight lifting capacity of 500 lbs, maximum load limit for the back and
leg section 100 lbs each.
2. Never set anything under the table frame.
3. Never operate your table on an uneven surface. Adjust the leveling feet so that
your table is stable.
4. Never operate your table with unequally distributed weight such as sitting on the
foot or head section while raising or lowering it.
5. Never raise the head or foot section with a client in the prone position (face down).
6. Never use or store your table in a wet or very humid environment. Water and
excessive moisture can damage the wood cabinet and electrical components.
Evidence of exposure to water or moisture will void your warranty.
7. If you have purchased the Flexible Armrest Option, never use the Armrests as
handholds or body support mechanisms, especially when setting clients on or off
the table.
8. Never attempt to use the foot lift section to support concentrated weight such as
sitting or standing.
SAVE THESE INSTRUCTIONS
Product Code: LE04X
www.spaequip.com
P: 707-737-1100 F: 707-737-1150
Page 5 of 15
