To turn off your watch,
long press
in the main screen (where you see the time). You
will see a battery level along with some serial numbers. From that screen,
long press
one more time. You will see 3 options:
Power Off
,
Reset
and
Cancel
.
Long press
on
Power Off
.
To turn your watch back ON, simply
long press
the
home button
at the bottom of the
screen for a few seconds. If the screen does not turn on after a few seconds while
pressing, charge your watch using the USB charger provided.
Inaccurate measurement
Your watch tracks data such as steps and heart rate. Please keep in mind that steps
may be counted inaccurately if you move your wrist in a similar way than you do while
walking. Please note that all information presented is intended to be used for personal
educational or informational purposes only. Please refer to our
more information. If you have any questions, email us at [email protected].
Screen not bright enough
Make sure the brightness of your screen is set to the max. To select the brightness on
your watch, long press on
Others
, then
quick tap
multiple times until you see
Brightness
.
Long press
to select
Brightness
, and
quick tap
to select the brightness
level you desire. To apply, long press.
Note
: Keep in mind that the watch’s brightness consumes more battery life.
Not consistently receiving text and call notifications
If you are not receiving text and call notifications, your watch might be disconnected,
out of range or out of power. Please refer to the other troubleshooting sections to
resolve any of these issues.
Da Fit app shows too many ads
Da Fit is developed by a third party different from Spade & Co. If you have any
complaint or suggestion about the app, please email them directly at [email protected].
20
