BEFORE INITIAL START-UP
Read the safety instructions and the manual before use! Check the infrared heating element for visible damage
and whether the main voltage is in accordance with the voltage information on the type plate (verso). If you notice
damages on the element, do not use it – contact your specialist dealer.
We recommend that you not throw away the original package of the device. Store the original package for possible
transport.
START-UP
Install the infrared heating element with the delivered assembly kit and connect with the main cable!
ASSEMBLY
For the assembly please use the included drilling template with instructions.
ELECTRICAL CONNECTION
The infrared heating element is provided with a main plug. After having finished the assembly, connect to a 120 Volt,
60Hz socket. Room temperature controller can be included in the system by adapter plugs (socket thermostat) or in
case of a fixed connection, consult an installation specialist to install a control – taking into account the appropriate
standards and norms of the country concerned.
CLEANING AND CARE
Before cleaning, always disconnect the main power plug. To clean you should use a smooth and damp cloth and a
little dish detergent. Never clean the infrared heating element and the power supply cables under running water, nor
submerse in water. Do not use harsh, abrasive or easily inflammable detergents.
EC – DECLARATION OF CONFORMITY
As manufaturer, we declare that the product VCIR-a-b-c-d to which this declaration refers to is in conformity
with the following directives and standards:
DISPOSAL
The infrared heating element has to be disposed separately from general household waste at government places
provided for this purpose. You can obtain detailed information for disposal at the specialist dealer where the product
was purchased.
EN 60335-1:2012+A11
EN 60335-2-30:2009+A11
EN 62233:2008
EN 6100.3.3:2013
EN 6100.3.2.2014
EN 55014.2.2015
AD C TUV US
