HOT-613 User's Manual 12
Connectors & Sockets
Connectors
ITEM
FUNCTION
JP12
On-board PCI Primary IDE Connector
JP13
On-board PCI Secondary IDE Connector
CN1
On-board Floppy Controller Connector
CN2
On-board Parallel Port Connector
CN4
On-board Serial port-1 Connector
CN3
On-board Serial Port-2 Connector
JP29
IrDA Connector - * Note 1
J6, J7
USB Connectors - * Note 2
KB1
PS/2 Keyboard Connector
PS1
PS/2 Mouse Connector - * Note 3
J11
PC Speaker Connector
J12
Power LED & Keylock Connector
JP24
Hardware Reset Switch Connector
JP36
Power Management LED Connector
JP21
On-board IDE Read/Write LED Connector
JP25, JP37
12 V Cooling Fan Power Connectors - * Note 4
JP22
EPMI Connector
JP34
ATX Power Switch Connector
Note 1: JP29 - Infrared module connector
The main board provides a 5-pin infrared connector - JP29 as an optional
infrared module for wireless transmitting and receiving. Only first 4 pins are
available, left 3 pins are reserved for future use.
Note 2: J6, J7 - USB connectors
The main board provides two sets USB (Universal Serial Bus) connectors
- J6 and J7 for USB devices use.
Note 3: Dual FAN - 12V cooling fan power connectors
The main board provides dual on-board 12V cooling fan power connector for
cooling fan. Please make sure the red wire connect to +12V and black wire
connect to ground (GND).