9
8
spaceti
spaceti
EN
EN
Sub-GHz communication channel
The Device uses the open license 915 MHz (902-928 MHz) band.
Installing the Device
Only an authorized Technician installs and removes the Device.
WARNING! T
he user is obligated to ensure the installation of the Device is permitted
(especially the wireless technologies and Sub-GHz communication chan-
nels) before installation and operation or to procure permission from the
authorized individual (most often the property owner or manager) to en-
sure that no limitations on using such technologies in the planned Device
installation area are violated. The Manufacturer is not responsible for any
damages caused by installing or using the Device in areas without permis-
sion or if the Device was not installed by an authorized Technician!
2.
Operating the Device for the first time
Upon installation, the technician will remove the protective cover as seen
on image X, which will connect the battery to the circuit and the Device
will begin to operate.
3.
Fig.2
Pull
protective cover
WARNING!
Under no circumstances can a battery
with specifications different from those
listed in the technical specifications be
used. See Chapter 2 – Information about
the Device
It is forbidden to re-charge the battery!
It is forbidden to dispose of used batter-
ies in the trash. Used batteries should be
delivered to collection points!
Fig. 3
Using the Device in a new location
The technician will remove the
Device, prepare it for transport, and
then re-install the Device using the
MEC 1 Clicking tool.
WARNING!
If the user installs the Device without the Technician, or replaces the battery
without the Technician, or uses the Device at a new location, the Manufac-
turer is not responsible for any damages that could be caused, neither to the
Device, nor in the unauthorized installation location, nor any possible health
damages to individuals!
5.
Fig. 4
Operating the Device and replacing the battery
The Technician replaces the battery during regular maintenance visits.
The Technician decides whether it is necessary to replace the battery. If they
are both to be replaced, both batteries will be replaced at once and the same
type of battery from the same producer will be installed!
4.
Rotate
Push
MEC 1
