Seaich Corporation, LLC. All rights reserved. www.seaich.com | Spacerails, LLC. www.spacerails.com
Page 5
1 PREPARE THE COASTER COMPONENTS
C
RAIL SPLITTER
Prepare Rail Splitter:
Attach one Rail
Clip to each of the 3 Rail Splitter posts
(3 total Rail Clips).
Step 1:
Attach one Arm Holder A and one
Arm Holder B with one Arm Sheath. Insert
one Arm Clip into Arm Holder A.
Step 3:
Turn the Arm Lock
counter-clockwise to secure
the Arm Clip in place.
Step 2:
Insert Arm Lock through
Arm Holder A and Arm Clip.
B
ARMS
(QTY: 40)
To avoid damaging parts, do not move or adjust the Rail Clip while locked in the arm. To move the Rail Clip,
release Arm Lock by turning clockwise, position Rail Clip as desired, then secure Arm Lock again.
Step 1:
Interlock 6 Base blocks at tabs
as shown below. Be sure tabs connect.
Step 2:
Press 2 Base Holder A and
2 Base Holder B pieces into the
Base blocks as shown below to
secure the Base blocks in place.
A
BASE ASSEMBLY
Base Holder A
Base Holder B
Base Holder B
Base Blocks x6
Make sure Base
Blocks connect
at tabs.
