www.spacemanusa.com
Phone: (720) 328-1020
Email: [email protected]
Unpacking
2. Check for shipping damage
Inspect the machine for any shipping damage. If
you find any, contact Spaceman USA Technical
Support immediately after unpalletizing. Our
technicians will help you assess the damage and
determine the appropriate action prior to
accepting the delivery.
1. Unpalletize Machine
1. Cut packing straps, and remove cardboard lid
and outer sides from the pallet. DO NOT cut
cardboard.
2. Remove plastic wrapping around machine.
3. Cut stabilizing straps, being careful not to
scratch or dent the machine panels.
4. Prepare the table or stand that the machine
will be placed on.
5. If the table or stand has casters, lock all
casters prior to setting the machine on top.
6. Place the machine on top of the stand,
countertop, or table.
7. Place the machine in its final location
according to the Installation Requirements
(Page 5).
Unpalletizing requires lifting.
Two or more personnel should
remove the machine from its
packaging and place it in its final
operating location.
Failure to do so may result in severe
injury or damage.
3. Unpack and inspect parts
Refer to detailed parts diagrams if necessary (Page 19).
1. Remove all packaged parts and accessories from
your machine.
2. Organize items on a clean table or operating area
using the checklist below.
⃝ Hopper Lid
⃝ Front Drip-Tray Shelf
⃝ Front Drip-Tray + Splash Shield
⃝ Side Bumpers (2)
⃝ Dispensing Handle
⃝ Draw Valve Pin
⃝ Start-Up Kit
⃝ Brush Kits (1 Large and 1 Small)
⃝ Machine Manual
3. Inspect for damage immediately upon unpacking.
and call Spaceman USA Technical Support if you
discover any damaged or missing parts.
4. Clean and properly lubricate machine parts prior to
machine operation.
After unpacking and inspecting the parts, you are ready
to disassemble the machine and prepare for the first
operation. Read carefully about Routine Maintenance
(Page 7) prior to disassembling your machine for the
first time.
6