Instruction manual
SPACE s.r.l.
ARS680WS - ARS680 WD - ARS660WD
Code M0203 - rev.1.0
(11/2010)
Page 4/52
SPACE s.r.l. a s.u. -
Via Sangano, n° 48 - 10090 Trana (Torino - Italy)
Tel. (+39) 011/934.40.300 – Fax . (+39) 011/933.88.64
e-mail: [email protected]
1 INTENDED
USE
ARS660WD, ARS680WD and ARS680WS systems are machines for the detection of all vehicle
special angles.
Angles are detected by four detectors with microprocessor technology and infrared
measurement system, and data transmission (without any cable connection between
detectors).
In ARS680WS models, the data of front cabin detectors are transmitted VIA RADIO through
modules
.
Vehicle max. allowed wheelbase length for data transmission and angle measurement is
4.5m.
Machine operational temperature range: 0 to 40°C.
2 OPERATOR
TRAINING
The machine must be used by specifically trained and authorised personnel, only. To ensure
proper machine use and that measurements can be efficiently taken, operators must be correctly
trained and acquire the skills consistent with the instructions provided by the manufacturer. In
case of any doubts relating to machine use and maintenance, refer to the instruction manual and
then, if such doubts persist, contact an authorised after-sales centre or SPACE s.r.l. technical
assistance directly.
2.1 General Preventive Measures
•
During operation and maintenance of this machine, always abide by the safety and
accident-prevention regulations in force.
•
The machine must only be used by adequately trained and authorised persons.
•
This machine must only be used for the purpose for which it was expressly intended.
SPACE s.r.l. declines all liability for injury or damage to persons animals and things
caused by improper machine use.
•
Accessories and spare parts must be fitted by persons authorised by SPACE s.r.l.
and only original spare parts and accessories must be used.
•
The machine must only be operated in places where there is no danger of explosions
or fire.
•
Removal or changes made to safety devices, or warning signals on the machine can
cause serious hazards and represent a violation of European safety regulations.
•
Before doing any maintenance jobs on the system, always disconnect the power
supply.
In case of doubt, do not interpret, but contact SPACE s.r.l. technical assistance in
order to obtain instructions suitable for performing operations in total safety.
•
Do not allow unauthorised personnel to come near the wheel aligner during use.
