Instruction manual
SPACE s.r.l.
ARS680WS - ARS680 WD - ARS660WD
Code M0203 - rev.1.0
(11/2010)
SPACE s.r.l. a s.u. -
Via Sangano, n° 48 - 10090 Trana (Torino - Italy)
Page 9/52
Tel. (+39) 011/934.40.300 – Fax . (+39) 011/933.88.64
e-mail: [email protected]
3.6.4 Detector Keypads
Figure 5
KEYS DESCRIPTION
Detector switch-on key.
If pressed at the same time, they allow detector
manual switching off.
Legend of Figure 5:
A -
•
Green LED on:
For ARS680WS front detectors and for all rear
detectors:
detector battery is under charge
For ARS680WD and ARS660WD front detectors:
indicating that power supply cable is fitted
B -
•
Red LED steady on:
detector is on
•
Red LED flashing (with
battery detectors):
detector is flat (when battery residual charge is lower than
or equal to 30%); it will turn off after a few minutes
3.7 Connection cables
The connection cables are fastened to the front sensors (see Figure 2).
Their job is to permit communication between the front sensors and the console as well as
power the sensors themselves.
The rear sensors never communicate directly with the console. Their data are
transmitted/received through the front sensors.
Always use the left cable with the left detector and right cable with the right detector.
Reversing the cables the communication is not possible. Cables are not interchangeable.
(A) Green LED
(B) Red LED
