SP-TP7 Preliminary User Guide
v2.1
© 2020 SP Controls, Inc.
2 of 2
Phone: 650-392-7880
www.spcontrols.com
Toll-Free: 877-367-8444
Fax: 650-392-7881
MATRIX: Use this section if you have multiple NRCs, each controlling a display, and want to
control a matrix switcher as well. One of the NRCs will require the use of an RS232/IR Puck
(PX2-PUC-232/IR) for the control port that sends commands to the switcher. All configuration
for the switcher control happens on the TP7
Matrix
tab. Please contact SP Controls technical
support for help with this feature, if you plan to use it.
CLEANING: Since the advent of SARS-CoV-2, cleaning of commonly touched surfaces has
become an increasing priority worldwide. To clean the surface of the TP7 touchpanel, use a 70%
isopropyl alcohol wipe to gently wipe the face of the screen. If prepared wipes are not available,
apply 70% isopropyl alcohol to a clean, soft, lint-free, preferably microfiber cloth until it is
damp but not saturated.
AVOID abrasive cloths and paper towels
AVOID excessive wiping and scrubbing, which might cause damage
DO NOT USE aerosol sprays, window cleaners, bleach, or chlorine-based products
DO NOT SPRAY cleaners directly onto the screen; spray on wiping cloth instead
DO NOT get moisture into any opening
Keep liquids away from the TP7
MOUNTING: The TP7 can be used as a desktop device when mounted to the SP-TP7-DSKTP
Secure Angled Tabletop Stand sold separately. Alternatively, the TP7 can be mounted directly
to lecterns, tables, walls, 4-gang backboxes or mud rings using the aluminum SP-TP7-WMPRO
Secure Wall Mount Plate, also sold separately. Both mounting packages come with all necessary
hardware and full illustrated instructions. An appropriate mud ring also is available from
SP Controls under part code PX2-MUDRING.
Please contact SP Controls technical support to assist with your initial setup of the TP7, and
with any questions that you may have about the product.
