SPSWH.com SP Blue Solo 80 installation manual Doc
SP.
SP Blue Solo 80.E.2021.REV1.0
14
|
P a g e
6.2.3
Instructions and conditions of the warranty:
•
Installation must be in accordance with the instructions of the official manufacturer's
installation and operation manual from authorized personnel, certified by the manufacturer
•
All repairs or maintenance must use spare parts approved by the manufacturer
•
*For the proper operation of the system, the water should be potable and have a low mineral
content and be serviced annually by flushing the system to prevent mineral buildup.
•
For the proper operation of the tank or the solar panel and prevention from damage, it is
necessary to examine the safety valve every year (6 months in areas of hard water) and in case
they have become clogged by scale or damaged in any way, they must be replaced immediately
6.2.4
Warranty Remarks:
•
Any damage to the glass must be assessed and remedied immediately, such as cracks etc. or else
the potentials for damage to the absorber and loss of system performance
•
Any superficial discolouration of the absorber may reduce panel efficiency slightly but will not
damage the system and is not cause for concern
•
Any discolouration or corrosion of the racking and support base does not impact the structural
integrity of the racking and is not cause for concern
•
Any discolouration or corrosion of the storage tank jacket (outer casing) does not impact the
structural integrity of the storage tank and is not cause for concern
•
The water inside the tank should not exceed 95°C (203°F) and pressure of 10 bar (145 PSI)
•
Warranty does not cover the cost of labour or shipping
•
Warranty is only valid with signed and stamped invoice by the customer and manufacturer
6.2.5
Warranty and Service Claims
•
Contact installer of the SP Blue Solo 80 or 80E system.
•
If the installer is not available contact SP Solar Water Heaters
–
o
o
787-504-9927