6
Chart 2
Press the “M” button and hold for approx.3sec to leap to next Data Set.
The UNIT Button Function Declaration:
The functions are separated into two group of measurements.
One is the rate measurement which is shown on the left side of the following flow chart.
The other is the revolution and length measurements which are shown on the right side of the
following flow chart.
The user can press the “UNIT” button once to change from RPM, rPm...., to the next sequentially.
Press the “UNIT” button and hold for approx.3sec to leap to next group, can select to REV test
Data
0
Max Data0
Min Data0
Avg Data0
Data
1
Max Data1
Min Data1
Avg Data1
Data
2
Max Data2
Min Data2
Avg Data2
Data
9
Max Data9
Min Data9
Avg Data9
