5
To store a measurement:
Press the measure button until the reading is displayed on the LCD display. Observe the reading
and press the MEM button to record.
The maximum, minimum, average and data during one shot measurement will be stored into a
memory set. Then the data number will increase by one.
To recall the stored data from memory:
Use the MEM button to scroll and view the stored data point.
1.See the flow chart 1 for a brief presentation of how to recall the stored data sequentially.
2.See flow chart 2 for a brief presentation of how to quick access or leap the data set to the next.
Stored data points will appear in the main display. Empty
Memory locations will read”—”. Maximum, minimum and average data will appear in the RPM
display with MAX/MIN/AVG symbol.
Chart 1
Press the “M” button once to next Storage
