10
Battery System Standard and Rating
The SP61065 battery tester will test each battery
according to the selected system and rating.
Use UP/DOWN key to select according to the actual
system standard and rating marked on the battery. See
in the below picture, the arrow indicated location.
CCA: Cold Cranking Amps, specified by SAE&BCI, most
frequently used value for starting battery at 0°F (-18°C).
BCI: Battery Council International standard
CA: Cranking Amps standard, effective starting current value at 0°C
MCA: Marine Cranking Amps standard, effective starting current value at 0°C.
JIS: Japan Industrial Standard, displayed on the battery as combination of the numbers
and letters, e.g. 55D23,80D26.
DIN
：
German Auto Industry Committee Standard
IEC
：
Internal Electro Technical Commission Standard
EN
：
European Automobile Industry Association Standard
SAE: Society of Automotive Engineers Standard
GB
：
China National Standard
Rating range as following:
Input correct test standard and rating, press Enter key, tester starts to test, and dynamic
interface "TESTING" prompted.
It takes around 5 seconds to display the battery test result.
CCA 1/10
Select Input
500A CCA
Setting Rate
