U
S
1. Read this Sprayer Owner/Operator
Manual carefully. Be sure you
understand how to operate this unit
properly before you use it. Failure to
do so could result in serious injury
2. Be sure to keep this manual handy
so that you may refer to it later
whenever any questions arise. Also
note that you are requested to
contact the dealer from whom you
purchased the product for
assistance in the event that you
have any questions which cannot be
answered herein
3. Always be sure to include this
manual when selling, lending, or
otherwise transferring the
ownership of this product
4. Do not lend or rent your machine
without the owner’s manual
5. Be sure that anyone using your unit
understands the information
contained in this manual
6. Never let a child under 13 years old
use the machine
sprayer. They can ignite or explode
causing serious injury
8. Always wear splash goggles and
protective gear and clothing when
sprayer
9. Lubricate the rubber lid o-ring with
Silicone Grease prior to
so the o-ring will seal properly.
10.Tighten all connections before using
the sprayer. Some may not be
properly secured and must be
tightened to prevent leakage
3. Warning labels on the machine
Sprayer Type .........................................................
..
... Back
p
ack
Model Names.....SP0,SP1,SP2,SP3, EK484, TP501, EcoScape
Dimensions (LxWxH)..................................20.9x14.2x8.3 in (530x360x210 mm)
Dry Weight..................................................................13 LBS (EcoScape 10 lbs)
Tank
C
apacity.........................................................................4 Gallons, 15.1 liter
Max. Pressure..................................150 PSI (SP0, SP2, SP3) 120 PSI (TP501)
80 PSI (EcoScape), 70 PSI (SP1, EK484)
Working Pressure.........................................15-80 PSI (SP0, SP2, SP3, TP501)
......
15-60 PSI (SP1, EK484,
EcoScape)
Sealed/O rings................................................................................ VITON/Nytril
Pump Type.......................................... External Piston (SP2, TP501, EcoScape)
External Diaphragm (SP1, EK484)
External High Pressure Diaphragm (SP3)
Triple Function Piston Diaphragm (SP0
Reparable
P
ump...........................................................................................
. Yes
Tank Mouth ................................................................................... 6”
Wide Mouth
Wand Type ................................................................ 20” Brass or 20" Fiberglass
Standard Nozzle ..............................
.......
.......
Adj Brass or Adj Plastic
or Fan Tip
If warning labels peel off or become soiled and impossible to read,
you should contact the dealer from which you purchased the
location(s).
Never modify your machine. We will not warrant the sprayer
if you use the remodeled sprayer or don’t observe the proper
usage written in this manual.
“The distinctive tank shape is a registered trademark of SP Systems’
affiliate, US Sprayer Holding Co, LLC, and licensed exclusively to
SP Systems’ for use with SP Systems’ registere
d
”large mouth”
trademarks.”
1. Parts location
2. For safe operation
US-3
BEFORE USING:
Lubricate all moveable rubber pieces
with Silicone Grease (o-rings, seals,
piston cup (if applicable), spindle in gun).
Keep breather hole in lid clear of debris.
Lubricating the seals and keeping the
breather hole open allows air into the
tank. Without this airflow, the tank may
collapse and crack due to a vacuum
created by the pump.
1. Tank
2. Pump
3. Lid
4. Shoulder Strap
5. Hose
6. Wand
7. Nozzle
1
2
3
4
5
6
7
Summary of Contents for EcoScape
Page 2: ......
