Hardware Installation
SY-P4VGA
21
5. Universal
Serial
Bus
USB1/USB2,USB3/USB4,USB20_1
This Motherboard provides 6 USB2.0 ports for your additional devices.
Plug the USB device jack into the available USB connector USB1, USB2,
USB3 and USB4.
USB20_1 is available. To make use of these USB ports, purchase a USB
cable from your dealer. The lay-out of USB20_1 connector is as follows:
6. Onboard Game port/audio (Audio Speakers connections)
When using 2 channel speaker, connect the speaker cable to line-out.
If you’re using 4 channel speaker, connect the front L/R speakers to
line-out and rear L/R speakers to Line-in. make sure that the audio
software is set to 4 channel speaker system. Line in is an available in 4
channel speaker mode.
If you are using 6 channel speaker, connect the front L/R speaker to
line-out, rear L/R speaker to line-in and center/Bass speaker to Mic-in.
Make sure that the audio software is set to 6 channel speaker system.
1
6
10
2
7
3
8
4
5
9
GND
(+)Data
(-)Data
Power
GND
GND
(+)Data
(-)Data
Power
