Hardware Installation
SY-P4VGA
13
Step 2 Install Memory Modules
The P4VGA mainboard supports non ECC and non registered DDR and
SDRAM modules.
The largest possible memory size is 2GB when using DDR module or
1GB using SDRAM.
Note1:
Before installing or removing any memory modules system,
power should be removed from the power supply (Remove AC cord
from the power outlet).
Note2:
SDRAM and DDR modules cannot be used at the same time.
Doing so can damage your hardware.
Note3:
This motherboard only support PC1600 and PC2100, PC2700
or PC3200 is not supportd.
Note4:
Please make sure that your memory modules are inserted
correctly. They can go in only one way, and should fit completely in
the socket without sticking out. Failure to do so will damage your
mainboard and memory module.
DDR1 DDR2 SDR1
