VIA 8237 Serial ATA Driver Installation
SY-KT880 DRAGON 2
79
Chapter 4
VIA 8237 SERIAL ATA DRIVER
INSTALLATION
You can use your VIA 8237 (SATA1, SATA2) as
1. Normal
IDE
function.
2.
RAID function. (RAID 0, 1)
To use SATA1 and SATA2 as normal IDE, please do the following steps
1.
Go to the CMOS setup SOYO COMBO FEATURE
2.
Then set the “ONBOARD SATA 1,2” to “SATA”.
3.
Install the VIA Serial ATA driver, see driver installation instruction
below.
To use SATA1 and SATA2 as RAID controller, please do the following
steps
1.
Go to CMOS setup SOYO COMBO FEATURE
2.
Then set the “ONBOARD SATA 1,2” to “SATA”.
3.
Go to the CMOS setup BOOT CONFIGURATION SETUP
BOOT DEVICE PRIORITY.
4.
Set the “First Boot Device” to “SCSI Card”
5.
Install the VIA Serial ATA driver, see driver installation
instructions below
Summary of Contents for SY-KT880 2
