SOYO SY-KT880 2, User Manual

Page: 65 / 119

BIOS Setup Utility
SY-KT880 DRAGON 2
61
3-3.3 SuperIO Configuration
CMOS Setup Utility
–
Copyright (C) 1985-2002, American Megatrends, Inc.
SuperIO Configuration
Configure ITE8705 Super IO Chipset
Item Help
OnBoard Floppy Controller [Enabled]
Serial Port1 Address [3F8/IRQ4]
UART Mode Address [Disabled]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Allows BIOS to Enable or
Disable Floppy
Controller.
:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F7:Previous Values F8:Fail-Safe Defaults F9: Optimized Defaults
SuperIO Configuration
Setting Description Note
Disabled Turn off the on-board floppy
controller OnBoard Floppy
Controller
Enabled Use the on-board floppy
controller Default
Disabled Default
(UART
Mode)
3F8/IRQ4 Default
(Serial
Port)
2F8/IRQ3
(recommend
for UART
Mode)
3E8/IRQ4
Serial Port
Address / UART
Mode Address
2E8/IRQ3
Choose serial port's I/O
address.
Do not set port to the same
address except for Disabled.
If [UART Mode Address] is set to [3F8/IRQ4 or 2F8/IRQ3 or 3E8/IRQ4 or 2E8/IRQ3]
Standard Default
IrDA SIR
(recommend)
UART Mode
Select
ASK IR
Allows BIOS to select UART
Mode.