Motherboard Description
SY-KT333 DRAGON Plus
2
Warning:
Do not unpack the motherboard from its anti-static
packaging until you are ready to install it.
Like most electronic equipment, your motherboard may be damaged by
electrostatic discharge. To avoid permanent damage to components ground
yourself while working by using a grounding strap. Otherwise, ground
yourself frequently by touching the unpainted portion of the computer chassis
to drain the static charges.
Handle the motherboard carefully, holding it by the edges.
You are now ready to start the installation.
1-3 KEY FEATURES
CPU SUPPORT
The SY-KT333 DRAGON Plus supports the following AMD
®
K7 CPUs:
Supports 200/266 MHz Front Side Bus Athlon /XP CPU
(750MHz ~ 2600+)
Duron
/Morgan CPU (650MHZ ~ 1.3GHz)
Newly released AMD Socket A CPUs may be supported by the SY-KT333
DRAGON Plus. Please check the FAQ at
http://www.soyo.com
for further
information.
CPU SETTINGS
The SY-KT333 DRAGON Plus provides the user with a very complete and
convenient CPU setting environment. The CPU settings are all adjusted
through the special SOYO COMBO page in the BIOS, therefore rendering
the use of jumpers obsolete.
CPU FSB Frequency
The SY-KT333 DRAGON Plus supports a wide range of CPU FSB frequency
settings:
100~255MHz for 100MHz and 133MHz FSB CPU
For accuracy and to maximize the board’s overclocking potential, the CPU FSB
frequency can be set up by 1 MHz increment. Please refer to Section 2-3 Quick
BIOS Setup for further information. This ensures that the SY-KT333 DRAGON
Plus has an overwhelming overclocking potential.
