Hardware Installation
SY-KT333 DRAGON Plus
37
Step 5 Power On
You have now completed the hardware installation of your KT333 DRAGON
Plus successfully.
1. Turn the power on.
2. It takes awhile to boot-up to the system. You will hear 3 beeps before seeing a
display on the screen.
3. To enter the BIOS Setup Utility, press the <DEL> key while the system is
performing the diagnostic checks
Note:
If you have failed to enter the BIOS, wait until the boot up
sequence is completed. Then push the RESET button and press <DEL>
key again at the beginning of boot-up, during diagnostic checks.
Repeat this operation until you get the following screen.
4. The BIOS Setup screen appears:
Phoenix – Award BIOS CMOS Setup Utility
SOYO COMBO Feature
PC Health Status
Standard CMOS Features
Load Optimized Defaults
Advanced BIOS Features
Load Fail - Safe Defaults
Advanced Chipset Features
Set Supervisor Password
Integrated Peripherals
Set User Password
Power Management Setup
Save & Exit Setup
PnP/PCI Configurations
Exit Without Saving
Esc : Quit
: Select Item
F10 : Save & Exit Setup
Change CPU’s Clock & Voltage
