Hardware Installation
SY-K7VEMPRO
46
Lock up (freeze)
When I boot up my system, everything works fine. It sees my CPU
and memory, detects my hard drive, floppy drive and CD-ROM but
locks up at "Verify DMI pool data... ", and it won’t go any further.
What should I do?
Please clear the CMOS via JP5 then choose 'load optimized default' in the
bios and save the bios and exit. Next, unplug all other add-on cards except
the video card and floppy drive controller, and see if it can boot from
floppy. Then put back the peripherals one by one to identify which one
causes the lockup.
I can not get my board to run properly.
Please make sure you have the latest bios and driver from the SOYO web
site at:
http://www.soyo.com
2-3.9 Power Off
There are two possible ways to turn off the system:
1. Use
the
Shutdown
command in the
Start Menu
of Windows 95/98
to turn off your computer.
2.
Press the mechanical power-button and
hold down for over 4
seconds,
to shutdown the computer. If you press the power-button for
less than 4 seconds, then your system will enter into
Suspend Mode.
You are now ready to configure your system with the BIOS setup program.
Go to
Chapter 3: BIOS SETUP
Summary of Contents for SY-K7VEMPRO
Page 94: ...90 ...
