SOYO SY-7VMA-B User Manual Download Page 95

Page: 95 / 102

Drivers installation

SY-7VMA-B

Step 2.

Install Drivers

Click the

Install Drivers

button to display the list of drivers software that

can be installed with your Motherboard. The Start Up program displays

the drivers available for the particular model of Motherboard you own. We

recommend that you only install those drivers.

(Driver Installation Menu)

A short description of all available drivers follows:

VIA 4in1 driver package

The 4 in 1 driver package includes all drivers your motherboard needs.

After selecting this driver package, one driver will be installed

automatically (the IRQ remapping utility), the other three are installed if

selected. By default all three drivers are selected. A description of the 4

drivers follows:



Bus Master PCI IDE Driver

This driver will speed up the data-transfer rate to and from the

harddisk.



AGP VxD Driver

This driver must be installed in order to be able to make use of the

on-board AGP Video functionality.

driver

revision:

VIA 4 in 1 driver package for Win 9x/NT

VIA S3 Savage Display Driver for Win NT

VIA S3 Savage Display Driver for Win 9x

VIA Ac97 Codec Driver for Win 9x/NT/2000

VIA S3 Savage Display Driver for Win 2000

VIA hardware monitor for (Win 95/98)
7VMA-B Wizard on Hand for (Win 95/98)

Cancel

Summary of Contents for SY-7VMA-B







































































































Search results

Summary of Contents for SY-7VMA-B

Reviews:

Related manuals for SY-7VMA-B

Brands by name

Popular brands

SOYO SY-7VMA-B, User Manual

Search results

Summary of Contents for SY-7VMA-B

Reviews:

Related manuals for SY-7VMA-B

Brands by name

Popular brands