Hardware Installation
SY-7VMA-B
24
2-3.1 CPU Installation
Your SY-7VMA-B motherboard comes with a CPU retention set kit. The
retention set is used to hold the processor attached to the Socket 370 CPU
connector on the motherboard.
Mark your CPU Frequency:
Record the working frequency of
your CPU that should be clearly marked on the CPU cover.
FSB 66MHz
400MHz (66 x 6.0)
466MHz (66 x7.0)
533MHz (66 x 8.0)
600MHz (66 x 9.0)
667MHz (66 x 10.0)
433MHz (66 x 6.5)
500MHz (66 x7.5)
566MHz (66 x 8.5)
633MHz (66 x 9.5)
700MHz (66 x 10.5)
FSB 100MHz
500MHz (100 x 5.0)
600MHz (100 x 6.0)
700MHz (100 x 7.0)
800MHz (100 x 8.0)
550MHz (100 x 5.5)
650MHz (100 x 6.5)
750MHz (100 x7.5)
850MHz (100 x 8.5)
FSB 133MHz
533MHz(133x4.0)
667MHz(133x5.0)
800MHz(133x 6.0)
933MHz(133x 7.0)
1.13GHz(133x 8.5)
600MHz(133x4.5)
733MHz(133x5.5)
866MHz(133x 6.5)
1000MHz(133x 7.5)
CPU Mount Procedure:
To mount the Celeron
TM
processor that you
have purchased separately, follow these instructions.
1.
Lift the socket handle up to a vertical position.
Summary of Contents for SY-7VMA-B
Page 102: ...98 ...
