Hardware Installation
SY-7VCM
43
2-3.5 Power On
You have now completed the hardware installation of your Motherboard
successfully.
1.
Turn the power on
2.
To enter the BIOS Setup Utility, press the <DEL> key while the system
is performing the diagnostic checks,
Note:
If you have failed to enter the BIOS, wait until the boot up
sequence is completed. Then push the RESET button and press
<DEL> key again at the beginning of boot-up, during diagnostic
checks.
Repeat this operation until you get the following screen.
3.
The BIOS Setup screen appears:
CMOS Setup Utility – Copyright ( C ) 1984-1999 Award Software
4
Soyo Combo Feature
4
PC Health Status
4
Standard CMOS Features
Load Optimized Defaults
4
Advanced BIOS Features
Load Fail - Safe Defaults
4
Advanced Chipset Features
Set Supervisor Password
4
Integrated Peripherals
Set User Password
4
Power Management Setup
Save & Exit Setup
4
PnP/PCI Configurations
Exit Without Saving
Esc : Quit
áâàß
: Select Item
F10 : Save & Exit Setup
Change CPU’s Clock & Voltage
Summary of Contents for SY-7VCM
Page 99: ...95 ...
