Hardware Installation
SY-6VBA 133
40
2-3.4 Jumper Setting
Step 1.
5V Stand-by indicator LED (LED 1)
This LED is lit whenever the 5V Standby voltage coming from the ATX
power supply is available. If you have connected your ATX power supply
to the motherboard, LED 1 should be lit.
Step 2.
External Suspend Button (JP1)
Some cases come with a suspend button, insert the plug into JP1. In
addition to this button, the system can also enter the suspend mode
through your OS.
Note:
Suspend mode only functions if your Power Management mode is APM.
Make sure that the BIOS setting for Power Management is APM. Windows 98
can be installed with ACPI Power Management (default is APM), in this case
suspend mode will not function either.
Step 3.
FSB boot-up frequency and AGP divider: JP2 and
JP7
The settings of JP2 and JP7 determine the FSB frequency at boot-up, and
more important, they determine the AGP divider and the group of FSB
frequencies that can be selected in the BIOS. Refer to the following table:
JP7
JP2
Boot-up
FSB
BIOS FSB
group
AGP divider
Short
Short Pin 1-2
66
66~83
1
Open
Short pin 1-2
100
90~122
1.5
Open
Short pin 2-3
133
124~155
2.0
1 2
1 2 3
1 2 3
1 2 3
1 2
1 2
Summary of Contents for SY-6VBA 133
Page 94: ...90 ...
