SOYO SY-6KL, Quick Start Manual, Page: 9 / 16

SY-6KL Quick Start Guide
9
Hardware Installation
Step 6.
Clear CMOS Data (JP5)
Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5 for at least 5
seconds, and then by shorting pin 1-2 to retain new settings. This jumper can be easily
identified by its white colored cap.
CMOS Clearing Clear CMOS Data Retain CMOS Data (Default)
JP5 Setting
Short pin 2-3 for
at least 5 seconds
to clear the CMOS. Short pin 1-2
to retain the
new settings.
Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.
3
2
1
3
2
1