32
BIOS Setup
Infra Red (IR) Function
Disabled: Disabled the IR function.
HKSIR:
Use UART in HKSIR mode
when your IR equipment
meets this specification.
ASKIR:
Use UART in ASKIR mode
when your IR equipment
meets this specification.
Onboard Parallel Port
Choose the printer I/O address:
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5
Onboard Printer Mode
Choose ECP + EPP (default), SPP or EPP,
ECP mode. The mode depends on your
external device that connects to this port.
ECP Mode DMA Select
Choose DMA3 (default) or DMA1. This
setting only works when the Onboard
Printer Mode is set at the ECP mode.
IR Transfer Mode
Half-Dup: Use IR function in half-
duplex mode.
Full-Dup: Use IR function in full-duplex
mode.
