28
BIOS Setup
Memory Hole At 15M-
16M
Choose
Enabled
or
Disabled
(default).
Some interface cards will map their ROM
address to this area. If this occurs, you
should select Enabled, otherwise use
Disabled.
Mem. Drive Str.
(MA/RAS)
Default setting is Auto. This item allows
you to change the setting to adjust the
current memory signals. when you run into
problems while using special SDRAM.
Do not change this setting if SDRAM is
not be used.
Spread Spectrum
Modulated
Choose
Disabled
(default) or
Enabled
.
Select Enabled when uses Spread
Spectrum Modulated 1.5% or 6% for FCC
or DOC testing.
CPU Warning
Temperature
Choose
Disabled
(default) or
Enabled
.
Set CPU temperature from 50¼C to 70¼C.
The system will slow down automatically
when CPU temperature goes beyond the
the pr-set value. CPU will continue to run
slow until the CPU temperate returns back
within the safe range.
Current CPU
Temperature;
System Temp and
CPUFAN1 Speed;
Vcore;
Shows the current status of CPU.
3.
After you have finished with the Chipset Features Setup, press the
<ESC> key and follow the screen instructions to save or disregard
your settings.
Power Management Setup
The Power Management Setup option sets the systemÕs power saving
functions.
Run the Power Management Setup as follows.
