6
Hardware Setup
JP22: CPU Burst Mode Jumper
Due to different designs, there are two kinds of CPU burst modes:
Interleave Burst and Linear Burst. Select the correct mode according to
the CPU you are using.
CPU Burst Mode
JP22
Interleave
(for P54C/P55C and AMD
K5/K6 CPU)
1
2
3
Linear
(for Cyrix 6x86/L/MX CPU)
1
2
3
When using a Cyrix series of CPUs, follow the below procedures after
select the burst mode:
1.
Press<Delete> key to enter the BIOS setup menu during the boot-up,
2.
Select ÒChipset Features SetupÓ,
3.
Set the ÒLinear BurstÓ to ÒEnabledÓ,
4.
Press <Esc> to go back to the main menu and choose ÒSave & Exit
SetupÓ to reboot your computer.
JP1: Smart Detect CPU Voltage Auto/Manual Jumper
For P54C/P55C and Cyrix 6x86/L CPUs, this board automatically
detects and adjusts the CPU voltage to the proper voltage. JP1 is
reserved for a few older non-Intel CPUs which can not be detect
correctly. If you run into problems while detecting the voltage of older
CPUs, remove the jumper cap to correct it.
