V200724
ACCESS & INDUSTRIAL CONTROL
SOYAL
1
1
1
1
2
3
2
2
2
2
3
- 4 -
SOYAL
SOYA
L
SOYA
L
AR-0600M Electromagnetic Lock
Installation Instruction
4
7
1
6
8
2
5
3
Remove the Mounting Plate
from the lock body
Install lock body on the Mounting Plate
Draw positioning line of lock
body
Wiring & Voltage Adjustment
Complete the assemble of The Mounting Plate
on the Lock body
Mark hole drilling position
Mounting Plate fix to door
frame
Hole drilling
Stick the Installation Template sticker into
the hole drilling position and mark the
hole drilling position for lock body
Drill the hole based on the hole position
on the sticker, after it is done, remove the
sticker
Put the lock body into the door frame, compare
it to the armature plate position (the position
should be considering armature plate position,
so when door is closed, lock is properly locked).
Draw the lock body position for marking.
Step 1:
Patented Anti-Falling Design, with flat shrapnel on both sides of
the magnetic lock, starting from left or right, tilt the lock to either left or
right and buckle the flat shrapnel
Step 2:
Continue to buckle the other side, so that the magnetic lock
body and the Mounting Plate are tightly buckled
Use the Hexagon Allen Wrench to fix the magnetic lock on
the Mounting Plate.
Step 1:
Use provided Hexagon Allen Wrench to
loosen the screws on the lock body to the state
where the Mounting Plate can be removed (do not
remove all)
Step 2:
Move the Mounting Plate to the left or right
by approx.1mm
Step 3:
Remove the flat shrapnel from the Mounting
Plate and pull upward
Step 1:
Loose the screw to open Cover
Part
Step 2:
Wire cable and bring the cable
out to the hole and adjust voltage if
necessary
Step 3:
Fix the Cover Part back with the
screw
Step 1:
Fix the middle hole on the door frame
position with Fixing Screw 4mm*25mm.
At this time, you can adjust the installation
position.
Step 2:
Fix the remaining holes with Fixing
Screw 4mm*25mm to the door frame to finish
Mounting Plate installation.