V200724
ACCESS & INDUSTRIAL CONTROL
- 3 -
AR-0600M Electromagnetic Lock
Installation Instruction
Armature Plate
Fix sexnut bolt, aluminum pipe, flat washer, rubber washer,
and rubber armature screw by sequence based on the picture
above. Last, lightly fasten the guide pin to secure the armature
plate
Stick the Installation Template sticker into the hole drilling
position and mark the hole drilling position for armature
plate
Separate the Installation Template Sticker into two
parts, take the armature plate's part and place it into
the door position
Drill the hole based on the hole position on the sticker,
after it is done, remove the sticker
Armature Installation Side View
1
2
5
3
6
Separate the Installation Template Sticker
Install armature plate
Mark hole drilling position
Finished installation
Hole drilling
Suggestion for door
hole is 10mm
Sexnut Bolt
Aluminum
Pipe
Flat Washer
Armature Plate
Rubber Washer
Rubber Armature
Screw M8*20mm
For Lock Body
For Armature Plate
Armature plate fixed to door, the installation is finished.
※
Remarks: Rubber washer can make small adjustment
and movement for the armature plate, but still tightly
secured armature plate and lock body.