1.
** MOUNTING BRACKET **
FIRST, LOOSELY ATTACH THE MOUNTING BRACKET TO THE DOORFRAME BY
INSERTING 2 SCREWS THROUGH THE 2 PRE-DRILLED HOLES ON BOTH ENDS
OF THE MOUNTING BRACKET.
ADJUST THE MOUNTING BRACKET TO THE DESIRED POSITION AND THEN
TIGHTEN THE BRACKET TO THE DOORFRAME WITH ANOTHER 6 SCREWS.
2.
** ELECTROMAGNETIC LOCK **
INSERT THE 2 INCLUDED SCREWS THROUGH THE PRE-DRILLED HOLES ON
THE LOCK AND SCREW TIGHTLY TO THE MOUNTING BRACKET.
3. ** MAGNETIC PLATE **
FIRST, LOCATE THE PROPER POSITION ON THE DOOR THAT CORRESPONDS
TO THE POSITION OF THE ELECTROMAGNETIC LOCK WHEN CLOSED.
INSERT THE 2 PINS TO THE MAGNETIC PLATE AND DRILL 2 HOLES
(ABOUT 6-7 MM) ON THE DOOR AT THEPROPER LOCATIONS TO
ACCOMMODATE THE 2 PINS. DRILL A HOLE AT THE CENTER OF THE
PLATE ALL THE WAY THROUGH THE ENTIRE DOOR. INSERT THE M5
FLAT-HEAD SCREW THROUGH THE CENTER OF THE MAGNETIC PLATE,
THROUGH THE DOOR, THE WASHERS, THE ALUMINUM TUB AND THE BOLT.
DO NOT INSTALL THE MAGNETICPLATE TO THE Z BRACKET TOO TIGHT
. LEAVE SOME SPACE TO ALLOW FOR BESTPERFORMANCE BETWEEN THE
PLATE AND THE LOCK.
MODEL AR-0400WS
