background image

12

13

IN THE BOX

PARTS

A.  Chainsaw

TOOLS

B.  Blade cover
C.  Mixing bottle
D.  Plug wrench
E.  Screwdriver

A

B

C

D

You will also need 2-Stroke engine oil according JASO FC classic, 

unleaded fuel and special chainsaw oil

.

Any parts missing? Call the customer helpline on 01904 727509, 

most parts can be sent out on next day delivery.

PREPARING TO ASSEMBLE THE 

CHAINSAW

Safety Features

a. LOW KICKBACK SAW CHAIN: helps significantly reduce 

kickback, or the intensity of kickback, due to specially designed 

depth gauges and guard links.
b i. CHAIN BRAKE: is a safety feature designed to reduce the 

possibility of injury due to kickback by stopping a moving saw 

chain in milliseconds. It is activated by the CHAIN BRAKE lever.
b ii. CHAIN BRAKE LEVER/HAND GUARD: protects the operator’s 

left hand in the event it slips off the front handle (while the saw 

is running) in the event of kickback.
c. STOP SWITCH: immediately stops the engine when tripped. 

The stop switch must be pushed to the ‘START’ position to start 

or restart engine.
d. SAFETY TRIGGER LOCK: prevents accidental acceleration of the 

engine. The throttle trigger cannot be squeezed unless the safety 

latch is de-pressed.
e. CHAIN CATCHER: reduces the danger of injury in the event 

that the saw chain breaks or derails during operation. The chain 

catcher is designed to intercept a whipping chain. 

NOTE:

 Study your saw and be familiar with its parts.

E

a

b

c

d

e

Summary of Contents for CS4100A-5






















Reviews: