8
SAFETY INSTRUCTIONS FOR ALL OPERATIONS
Safety Warnings common for grinding, sanding,
wire brushing, polishing, carving or abrasive
cutting-off operations:
a) This power tool is intended to function as a
grinder, sander, wire brush, polisher, carver or
cut-off tool. Re
ad all safety warnings, instructions,
illustrations and specifications provided with this
power tool.
Failure to follow all instructions listed
injury.
b) Operations such as polishing is not
recommended to be performed with this power
tool.
Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
c) Do not use accessories which are not
specifically designed and recommended by the
tool manufacturer.
Just because the accessory can
be attached to your power tool, it does not assure
safe operation.
d) The rated speed of the grinding accessories
must be at least equal to the maximum speed
marked on the power tool.
Grinding accessories
running faster than their rated speed can break and
fly apart.
e) The outside diameter and the thickness of your
accessory must be within the capacity rating
of your power tool.
Incorrectly sized accessories
cannot be adequately controlled.
