32
The gangplank or transition board should have non-slip finishing.
On the both sides of the gangplank or transition board, should mounted the facility to prevent the
truck from going over it’s edge.
When the gangplank or transition board is fixed its location, should adopt measures to prevent the
reverse joint truck from moving suddenly.
14.1.5.3 Lighting
When the photometric brightness on the operating field is less than 32LX, the vehicle should
equipped auxiliary light.
14.1.5.4 The suspending of the truck
The sling should be tied to the lifting spot which the factory appointed.
14.1.5.5 The synchronizing operation of the truck
Conveying bulky or heavy load using two trucks simultaneously is a dangerous operating which
requires special care. And this kind of conditions should be taken as special conditions and carried
out under the supervision of the operator responsible for operation.
14.1.5.6 Elevator (lifter)
The elevator (lifter) for transporting the industrial truck can bear the overall weight of truck, load and
the drivers. This kind of elevator (lifter) must be appointed, and the drivers should use the appointed
elevator (lifter).
14.1.5.7 Operating on the road vehicle (trailer) and rail vehicle
Before the motor industrial truck drive to the road, the road vehicle should apply the brake and
wedging to prevent moving.
Exception: the road vehicle equipped with automatic snap lock type parking brake can not use the
wedge.
The industrial motor truck passing in and out without connect to the tractor, to prevent the
semi-trailer hold up can use support.
It is necessary to build up the operating communication and operating order, to prevent the rail
vehicle move accidentally when downloading.
The road vehicle (trailer) and rail vehicle should endure the overall weight of vehicle, load and the
drivers. It is necessary to inspect if the pavement is crushing, having holes or other damage.
When the industrial truck is operating at high place or platform, should not use the industrial truck to
move other vehicles. Never open the door of the rail truck using industrial truck; expect for equipped
with special device and the driver has passed the train to use the device.
14.2 Applied to the driver
The safety operating of the industrial truck lies on the control manner of the driver ro a considerable
degree. The safety rules applied to the drives are as follows:
A
）
general rule;
B
）
transporting (lifting and stacking) rule;
C
）
operating (driving) rule;
D
）
the rule for the driver maintaining the truck.
Without regard to the rules maybe conduce:
A
）
the serious danger of damaging the driver or other personnel;
B
）
Damage the materials.
14.2.1 General rule
Only the personnel who have been trained and get the qualification of operation are permitted to
drive the industrial truck.
