background image

Southworth Products Corp warrants this product to be free from defects in material 
or workmanship for a period of 

1 year

 of single shift usage from date of shipment, 

providing claim is made in writing within that time period. This warranty shall not cover 

modified designs for special applications, failure or defective operation caused by 

misuse, misapplication, negligence or accident, exceeding recommended capacities, 
failure to perform required maintenance or altering or repairing, unless alteration is 

authorized by Southworth Products Corp. Except as set forth herein, there are no 

other warranties, express or implied, including the warranties of merchantability and 

fitness for a particular purpose, all of which are hereby excluded.

Southworth Products Corp makes no warranty or representation with respect to the 
compliance of any product with state or local safety or product standard codes, and 
any failure to comply with such codes shall not be considered a defect of material or 
workmanship under this warranty. Southworth Products Corp shall not be liable for 
any direct or consequential damages arising out of such noncompliance.

Southworth Products Corp’s obligation under this warranty is limited to the replace-
ment or repair of defective components at its factory or another location at Southworth 
Products Corp’s discretion. This is buyer’s sole remedy. Except as stated herein, 

Southworth Products Corp will not be liable for any loss, injury or damage to persons 

or property, nor for direct, indirect, or consequential damage of any kind, resulting 
from failure or defective operation of said product.

This warranty may be altered only in writing by Southworth Products Corp, Portland, 
Maine.

SOUTHWORTH PRODUCTS CORP

P.O. Box 1380, Portland, ME  04104-1380

Telephone: (800) 743-1000 • (207) 878-0700

Fax: (207) 797-4734

www.SouthworthProducts.com

1 YEAR WARRANTY

Summary of Contents for PLM 250















Reviews: