background image

Southworth Products

DDL Dock Lift Manual

DDL Dock Lift Manual

25

10.  Warranty & Contact Information

Southworth Products warrants this product to be free from defects in material or workmanship for 

the duration of the warranty period. Warranty periods vary and begin on the date of shipment. For 

specific warranty information, contact Southworth Products with the machine’s serial number.

Any claim for breach of this warranty must be received in writing by Southworth Products within 

the warranty period. Warranties shall not cover failure or defective operation, caused by misuse, 

misapplication, negligence or accident, exceeding recommended capacities, or any alteration 

or repair of the item purchased which has not been authorized by Southworth Products. Except 

as set forth herein, Southworth Products makes no other warranties, express or implied, 

including THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR 

PURPOSE, all of which ARE HEREBY EXCLUDED.
Southworth Products meets the labeling requirements of California’s Proposition 65. Southworth 

Products makes no warranty or representation with respect to the compliance of any product with 

other State or local safety or product standard codes and any failure to comply with such codes 

shall not be considered a defect of material or workmanship under this warranty. Southworth 

Products shall not be liable for any direct or consequential damages arising out of such non-

compliance.
Southworth Products’ obligations under any warranty or for any other damages which may arise 

under any sale, agreement, or contract, are limited to the replacement or repair of defective 

components at its factory or another location at Southworth Products’ discretion. This is buyer’s 

sole remedy under any such warranty, sale, agreement, or contract. Southworth Products will not 

be liable for consequential, incidental, exemplary, or punitive damages of any kind resulting from 

a breach of any warranty that it has provided or for breach of any term of any sale, agreement, or 

contract. Any warranty may be altered only in writing by Southworth Products.

SOUTHWORTH PRODUCTS CORP. 

P.O. Box 1380, Portland, ME 04104-1380 

Telephone: 800-743-1000 • 207-878-0700 

Fax: 207-797-4734 

www.SouthworthProducts.com

Summary of Contents for DDL 5-59M


























Reviews: