Southwire 779765 Operating And Maintenance Instructions Manual Download Page 3

•  Only qualified persons should use the Sumner Pallet Trucks.
•  Wear eye protection, hard hat, cut resistant gloves and safety 
    toe shoes when using this tool.
•  Do not use tool while tired or under the influence of drugs, 
    alcohol, or medication.
•  Keep body parts and loose clothing away from moving parts.
•  Always follow operating procedures.

 

•  Do not use if any parts are damaged as this can cause an unsafe 
    condition and lead to tool malfunction or failure. 
•  If tool is in disrepair, DO NOT USE. Have tool serviced at an 
    Authorized Sumner Repair Center.

FAILURE TO OBSERVE THESE WARNINGS COULD 
RESULT IN SEVERE INJURY OR DEATH.

FAILURE TO OBSERVE THESE WARNINGS COULD 
RESULT IN SEVERE INJURY OR DEATH

WARNING

 - Personal Safety Hazards

WARNING

•  Read and understand all instructions and safety information in 
this manual before operating or servicing this tool. 
•  Failure to observe these warnings could result in severe injury or 
death.

3

IMPORTANT SAFETY INFORMATION

4

IMPORTANT SAFETY INFORMATION

FAILURE TO OBSERVE THESE WARNINGS COULD 
RESULT IN SEVERE INJURY OR DEATH. 

FAILURE TO OBSERVE THESE WARNINGS COULD 
RESULT IN SEVERE INJURY OR DEATH. 

     WARNING

:

Tool Use Hazards

    CAUTION

Read and understand all the instructions and safety information in 
this manual before operating or servicing this tool.

    CAUTION

WARNING: 

Cancer and Reproductive Harm

    WARNING: 

•  Read and understand the entire owner’s manual before using 
    the pallet truck.
•  Do not place hands or feet under the pallet truck at any time.
•  Do not operate a loaded pallet truck on ramps or inclines.
•  Do not tip load pallet truck forks. This may cause damage to the 
    forks and personal injury if the rear of the pallet truck suddenly 
    “pops up.”

•  Never leave a loaded pallet truck unattended in the raised 
    position. Always lower load to the floor.
•  Do not load pallet truck beyond its rated capacity.
•  Secure load before transporting.
•  To prevent accidental tipping, make sure load is centered on the 
    forks.
•  Do not move a loaded pallet truck by other than manual force.
•  Replace warning labels if they become obscured or removed.
•  Only qualified personnel should use Sumner pallet trucks.
•  Do not use the pallet truck for any means other than outlined in 
    this manual.

FAILURE TO OBSERVE THESE WARNINGS COULD
RESULT IN SEVERE INJURY OR DEATH.

Prop 65

Summary of Contents for 779765










Reviews: