Southwestern Bell GH5811 Owner'S Manual Download Page 26

Prepare By: Dreamis So 

P.26   

2/13/04 

“ ”, ” ” side key to select the Caller ID record that you want to dial. 

Note:You can review and redial up to 40 Caller ID calls from the handset. 
2.  Press the “TALK” button on the handset. The number will scroll across the screen 

from left to right as it is dialed. 

Note:If you review  the Caller ID call from the handset, you will need to redial the call 
from the handset (by pressing the “TALK” button). 

With current Telecom redialing situations, there are 2 redial options: (1) 10 digits 
without a 1 prefix and (2) 10 digits with a 1 prefix. 

Option I:10 digits without a 1: In some areas of the country, the area code must be 
included, even when  dialing a local call. In this situation, simply press  “TALK” 
button to dial out. You can press the FORMAT  key to add “1” prefix and your long 
distance call will be dialed out. 
Option  II:11 digits with a 1: Since the 1 prefix will be added automatically when 
dialing a 10 digit number, simply press the handset “TALK” button to make your call. 
If your area requires that you add 1 before your area code, then you should press 
FORMAT key to reprogram the dialed numbers. Then, your long distance call will be 
dialed out. 

 

Caller ID Erase 

To Erase a Call Record: 
1.  When the current display shows the handset name or handset  number, press the 

VOL/SCROLL  “ ”, ” ” side key to select the Caller ID record you want to erase. 

2.  Press  “DELETE” button to erase the call record; the display will show  “DELETE 

CALL ID?” 

3.  Press “DELETE” button again; the Caller ID record will be deleted and  the display 

will show the next call message. 
Note: If the current displayed message is the last message to come in, then the display 
will show “END OF LIST”. 

 
To Erase all Call Records: 
1.  When the current display shows the handset name or handset number, press the 

VOL/SCROLL “ ”, ” ” side key to review the Call ID record. 

2.  Press and hold  “DELETE” button to erase all call records; the display will show 

“DELETE ALL?” 

3. Press “DELETE” button again; all the Caller ID records will be deleted. 

Summary of Contents for GH5811

































Reviews: