Southwestern Bell Freedom Phone GH2410C, Owner'S Manual, Page: 23 / 25

TROUBLESHOOTING GLOSSARY
41 42
Useful Feature and Terms
Calendar/Clock Visual display of date and time.
Caller ID Enables users to view name and number of callers. Contact your local telephone
company to subscribe to Caller ID Service.
Caller ID Log Stores up to 40 Caller ID entries.
Call Timer Allows timing of phone conversations.
Data/FAX Port Allows connection of a PC or FAX machine directly into the phone versus a
wall outlet.
Dial from Call id log Allows to dial from Caller id log
Display The Liquid Cr ystal Display (LCD) shows clock and calendar, number dialed, low
batter y indicator, Caller ID information and call timer.
Flash
A signal sent by the phone to the local telephone company supporting services suchas
call waiting.
Message Waiting Indicator A visual indicator that there are new messages in your voice mail
box. Requires FSK signaling by phone company. Contact your local telephone company to
subscribe to Voice Mail Service.
Mute
Prevents the party on the other end of the line from hearing local conversation while still
allowing that party to be heard.
New Calls Indicator
A visual indicator that new calls have been received.
Redial Performs single button dialing of last number dialed.
Speed Dialing Allows programming of frequently dialed numbers so that they can be dialed
with the two touch speed dial button. (20 entries)
Tone/Pulse Option Enables you to switch from pulse (rotar y) to tone dialing.
Volume Level Control Permits volume adjustment of the handset during a
conversation.
FSK type Signaling
A signal used to turn on and off the message waiting indicator, can be
sent by the telephone company with a ringing signal or without.
Notioe:This equipment meets the applicable lndustr y Canada Terminal
Equipment Technical Specifications. This is confirmed by the registration
number. The abbreviation, IC before the registraion number signifies that
registration was per formed based on a Declaration of Confomity indicating
that lndustr y Canada technical specifications wrere met. It does not imply
that lndustr y Canada approved the equipment.
Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company.
The equiment must also be installed using an acceptable method of
connection. The customer should be aware that compliance with the above
conditions may not prevent degradation of ser vice in some situations .
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together. This precaution may be particularly
important in rural areas.
Caution: Users should not attempt to make such connections themselves,but
should contact the appropriate electric inspection authority, or electrician, as
appropriate.
Notice:The Ringer Equivalence Number (REN) assigned to each terminal device
provides an indication of the maximun numbe of terminals allowed to be
connected to a telephone inter face. The termination on any inter face may
consist of Ringer Equivalence Numbers of all the device does not exceed 5.
Privacy of communications m y not be ensured when using this telephone.
Inter ference lnformation
Operation is subject to the following two conditions:(1)this device may not cause
inter ference, and (2)this device must accep any inter ference, including
inter ference that may cause undesired operation of the device
a