Southwestern Bell Freedom Phone GH2410C, Owner'S Manual, Page: 11 / 25

Addltional Options
Adjust the volume in the
earpiece
Switch to temporary tone
dialing
Receive a call waiting call
Mute a call
1. Pick up the handset from the base. to press
key
2.Wait until you hear a dial tone and then dialthe
number you wish to dial.
3.
When you are finished talking press the key or
place the unit back into the base to end the call.
BASIC OPERATION
BASIC OPERATION
Press during a call until the desired volume level
is reached.
Press the key after the phone is in use. The phone
will remain in tone dialing mode for the duration of the call.
Press to go to the new caller.
Press again to go back to the original caller.
Press the key.
Press to continue speaking to the caller.
17 18
1. If the handset is in the base lift the handset from The
base. The handset will turn on. There is no need to push
the
key if the unit is on the base when the call
comes in.This auto-answer feature canbe programmed
off
2. If the handset is off the base you will need to press
to answer the Call. the display will show the
Caller ID information after the first ring.
When you hear the phone ring:
3. When you are finished push or place the
handset back on the base.
Making Calls
Note: INUSE
The light on when the line is active.
MIN SEC
TALK
Receiving Calls
TALK
TALK
TALK
MIN SEC
2.Wait until you hear a dial tone and then press
to redial the number last dialed(up to 32 digits.)
You can also press /pause first to display
the number and then press talk to dial the
number displayed.
REDIAL
REDIAL
MIN SEC
Redialing
1.Press .
TALK
Note:
Flash
Flash
PROG
PROG
TALK
NEW TOTAL
CID
CH
ERA SE
REV VOL
EDIT SAVE PAUSE
OPTION
Southwestern Bell
Freedom Phone R M U T E
CID
CH
ERA SE
REV VOL
EDIT SAVE PAUSE
OPTION
Southwestern Bell
Freedom Phone R M U T E
CID
CH
ERA SE
REV VOL
EDIT SAVE PAUSE
OPTION
Southwestern Bell
Freedom Phone R M U T E