Questions? Call Toll Free at 1-800-737-2112
Copyright © 2018 MAT Engine Technologies, LLC
EN - 6
EN - 7
Specifications
• Save all instructions
Controls & Features
Unit Weight ............................................105 lbs (48 kg)
Ram Force ........................................................... 6 Ton
Cycle Time ................................................. 18 Seconds
Wedge Size .............................. 5 Inch Hardened Steel
Gear Pump ................................................ Singe Stage
Max Log Length......................................... 20.5 Inches
Max Log Diameter ....................................... 10 Inches*
Electrical Requirement ....................... 120V AC - 60Hz
Hydraulic Oil Type ......... Shell Tellus 22, Mobil DTE10,
ARAL Vitam GF 22, BP Energol HLP-HM22
Hydraulic Fluid Max ............... Approximately 3.5 Liters
Max Hydraulic Pressure ................................ 3480 PSI
Ambient Operating Temperatures ...............14° - 100°F
(-10° to 38°C)
Read, understand and follow this owner’s manual
before operating the equipment. Familiarize yourself
with the location and function of the controls and
features. (Fig 1)
1.
Motor Switch -
Depress switch to electrically
activate the electric motor. Upon release, the
switch will return to an off position.
2.
Hydraulic Control Lever -
Controls the forward
and backward movement of ram.
3.
5 Inch Wedge -
Splits and separates the log.
4.
Ram -
Pushes the log into the wedge.
5.
Vent Screw -
Loosen to prevent buildup of
internal air pressure. Tighten after use and
when moving to prevent leakage.
6.
Hydraulic Pump -
Pumps the hydraulic oil
through the system.
7.
Support Leg -
Supports the Log Splitter
while operating.
8.
Handles -
For moving the Log Splitter.
9.
Oil Drain and Fill Port -
For adding or removing
hydraulic fluid.
10. Reset Button -
Detects overload and disables
motor. Push to reset.
11. Stroke Limiter -
Reduces the return stroke for use
with shorter logs.
12. Pressure Limiting Screw -
Factory set. Do NOT
adjust.
* Maximum Log Diameter is an approximate. Actual maximum log diameter is dependent upon log shape,
consistency, wood type and internal moisture.
4
2
3
11
7
6
5
9
1
Fig 1
8
10
12
