Turn the trunk base up side
down and attach legs (F)to the
bottom of trunk by using
screws (L) as shown.
Attach hinge (T) to back panel
(C) and top panel (A) by using
screws (M) as shown and then
tighten all screws using Phillips
screwdriver.
Open the top (A) and attach left support
(N) and right support (R) to the top (A)
and trunk base by using screws (M) as
shown.
Then place sponge cushions (S) on
front panel (B) as shown.
Close the top and let it drop down
slowly.
Note: Please do not open the lid
all the way back.