GPS Page 8 of 17 S82V
Chapter II: S82V receiver main unit
Base mode
:
When the BT light blinks, press P key to confirm, you will enter base mode. The
following display shows the receiver in base mode:
Fig. 2.10
–
S82V Bluetooth LED
Static mode
: When the BAT light blinks, press P key to confirm, you will enter static mode. The
following display shows the receiver in static mode:
Fig. 2.11
–
S82V battery power LED
Selecting the communication mode
After you have entered working mode, press and hold F key, when you hear 2 beeps, and see
a green light blinking, release the key, wait several seconds, then press F key, the 3 green
lights will blink in turns. Then you can select the different data link methods through the
different LED choices.
Checking the working mode and communication mode during operation
You can press F key one time to check the work mode and communication mode. There are 6
kinds of status, such as follows.
Static mode
: When you press F key one time and see the following figure, it means static mode.