GPS Page 7 of 17 S82V
Power on
receiver: Press P key one time, the receiver will power on.
Power off
receiver: Press and hold P key for few seconds, after three beeps all LEDS will
turn off. At that point release the key, the receiver will power off .
Self-Check:
when the receiver work abnormally, you can make a self-check to
fix it, the
operation procedure is as follows:
- Press and hold P key for more than 10 seconds as for turning it off but keeping pressed
the key after all lights have turned off.
- Release the key when you hear another beep: receiver will start to make a self-check.
The Self-check process lasts typically for about 1 minute, after which receiver will turn on and
resume normal operation.
Selecting the working mode
- With the battery inserted, then press and hold P key + F key: the receiver will start.
- Keep the P key + F key pressed until the six LEDs blink at the same time (Fig. 2.9),
then release the keys.
Fig. 2.9
–
S82V six LEDs blinking simultaneously
- STA LED is lit, now every time the F key is pressed, the working mode will change.
- Press P key when the chosen LED is blinking and the receiver will start the working
mode selected.