S660N GNSS Network RTK Receiver
Power:
Configure the receiver to use the power saving mode or not.
USB:
This is used to configure S660N receiver what kind of mode output from LEMO port when connect the
receiver with computer via L7U50 cable. USB and network port for optional.
Default Language:
Configure the default language for S660N internal web UI.
TimeZone:
This is mainly to setup the timezone for receiver.
Tips:
because S660N
ecei e doe n ppo he oice p omp , he op ion Voice P omp and Voice Vol me a e
displayed in grey.
4.2.3. Satellite Information
The Satellite Information provides all kinds
of tables, graph and the skyplot to view the information of tracking
satellites. And it is allowed to configure to use which satellite in constellation on/off page by checking on the
corresponding box.
Tacking Table
Here is the table to list all current used satellites and the other information for these satellites.
Tracking Chart
In this page, the histogram will indicate the signals from those used satellites, and allow to check each constellation
separately.