Galaxy G1
- 13 -
Indicator
Status Meaning
POWER
on
Normal voltage, built-in battery 7.4v
blink
Low battery
Satellite
blink
Number of satellite lock, cycle once every 5 seconds
Bluetooth
off
Handheld disconnected
on
Handheld connected
Signal/data
blink
Static mode: flashing in accordance with the setting
sampling interval when recording data
on
Base or rover mode: built-in module receives strong signal
blink
Base or rover mode: built-in module receives weak signal
off
Base or rover mode: built-in module receives no signal
§2.1.4 Mode check and switching
Mode check
In more work mode, press power key once, there is voice message to remind
current work status.
Mode switching
After power on receiver, use data collector to connect the receiver, then configure the work
mode and data link mode.
§2.1.5 Self -check
If the mainframe indicator is abnormal or not working properly, you can use the
automatic detection function, which is mainframe self-check.
Power on, press and hold the <Power> button, the power light turns on again
after being shut down, release the button to start the self-check.
