39
☞
Please check Chapter 6 Stake-out for further guidance.
10. SET
10.1 UNIT
Angle
: Set the angle unit, among degree, gon,
mil
Dist.
: Set the distance unit, M (Meter) or Ft (Feet)
Temp.
: Set the temperature unit,
℃
or
℉
Pressure:
Set the pressure unit, hPa, mmHg, inHg.
St Mile
: The start position of stake-out
Step:
The increased or decreased mile in each
step.
L/R:
The left or right offset from the middle line
of the road.
Up/Dn
: The elevation offset of the design point
to the middle line.
[NEXT]
: Go for next step (stake-out).